What is the best brand of golf clubs for beginners?
There are a lot of good brands of golf clubs out there right now. It would be unfair to other brands if we name any single one out of them. After a lot of research and tests, we found the top three brands that are the best of the best when it comes to catering to the needs of the beginners.
The top 3 brands of golf clubs for beginners are:
When it comes to club sets, these three companies produce the best sets for the beginners. When you are starting out with golf, you need a set that helps you improve your game and also makes sure you enjoy your golfing experience. The sets need to make sure the clubs included in the set are forgiving, to ensure you enjoy your time on the golf course, but not too much to make it seem like golf is a game with no challenge. When these factors are balanced while creating a set, the outcome is a set that is best for beginners.
The top 3 best golf club sets we found the best cater to the needs of a beginner are:
- Callaway Men's Strata Ultimate Complete Golf Set
- Wilson Men's Profile XD Complete Golf Set
- Precise M5 Men's Complete Golf Clubs Package Set
These three sets are all-rounders and make sure that beginners do not need to buy any other clubs that are not in the set. The clubs included in these sets make sure all your needs on the golf course are met. Other than that, the clubs also ensure you enjoy your first time on the course. They also help you improve your golf skills more than other sets in the market right now.
How does a golf club fitting work?
If you are looking to up your game and become better on the golf course, you will soon realize that your equipment plays a huge role in your performance on the course. Even if you get the best clubs on the market and also practice a lot, you will notice that you can get only a specific distance and not more. This is because your swing is unique and different from the swings of any other golfer.
What golf club fitting does is adapt your clubs to your unique swing. Your unique swing is something that no specific club right out of the factory can match with. So, golf fitting comes in the scene to ensure your golf clubs are tweaked to match your unique swing. Fitting your golf club will always improve your distance and accuracy because the trainer that will be fitting your golf club will have you do some shots after each fitting to ensure your performance is maximized.
How the fitting process works are, first you will be told to hit some golf balls with your current golf clubs. After the trainer collects the results of your shots, you will be asked to hit some more golf balls using clubs of different length, weight, flex and flex spots. After the correct shaft that matches your swing is found, the trainer will ask you to try some more shots with different clubheads until the best one that fits your needs are found.
Fitting our golf clubs will maximize your distance and make you more consistent. The process is very straight forward, and it is totally worth it if you are looking to bring out your best.
How are golf club shafts made?
There are multiple ways to manufacture golf club shafts. Different golf club shafts are manufactured in different ways. More specifically, it is the material that the shaft will be made from that decides the manufacturing process that must be used. We are going to look at how steel, graphite, and composite shafts are made now. And if you are confused about what composite shafts are made from, they are basically a combination of steel and carbon.
Steel shaft manufacturing process.
Steel shafts are manufactured by pulling and rolling blocks of heated steel. Rarely they are also made by welding pieces of steel together. Modern manufacturing process allows the length of the golf club to be made of different thicknesses. This allow the designers to be more flexible while setting the performances of the clubs. For example, a shaft with a thinner butt will feel more comfortable in hand, and a shaft with a thicker tip will have better accuracy and control over the ball.
Graphite shaft manufacturing process.
Graphite shafts are manufactured with some other materials as well. So, do not be surprised when you find steel mandrel in the middle of your graphite shaft. The shaft is made by wrapping sheets of graphite around the said steel mandrel. The design of the shaft can be changed by wrapping the sheets in different directions and angles. Usually, the graphite sheets are rolled by hand with the help of a computerized alignment roller. After the wrapping process is completed, the shaft is heated to approximately 250 degrees to allow the individual sheets to wrap together.
Composite shaft manufacturing process.
Composite shafts are manufactured in a similar process to the steel shafts, but the only difference is that the material used is an alloy of steel and carbon. This makes the shafts stronger but more brittle.
How a golf club works
There are many different types of clubs, and each of them works in a different way than the other. Specific situations require specific clubs to get you out of those situations and towards the hole. All these clubs have different functions and have different ways they perform these functions. The different types of clubs you will encounter on the course are:
These are the clubs that are used to shoot the ball off the tee. These clubs generate impressive distances and have great control as well. Drivers have the lowest loft. Other clubs have higher lofts than the driver. The driver is sometimes called the 1 wood. Drivers have a loft of 7-12 degrees. The lower the drive, the harder it is to use the club. So, you may think it must be very hard to use the driver. But since the driver is used to hit the ball from the tee, it is actually easier.
Other woods are used to hit the ball off the green, both the rough and the fairway. Most golf sets will have the 3 and 5 woods. Any wood with higher lofts is called a utility wood. As already stated, higher woods are easier to use. Beginners are suggested to use higher woods. Until a few days ago, professionals used higher woods. Higher woods actually produced high launch angles and less spin on the ball.
Irons are used to hitting the ball when you are 200 yards or less from the green. The general rule is to use higher irons the closer you are to the green. Irons are available from 2-9 irons and the pitching wedge. As with the woods, lower irons are harder to hit. Also, just like the woods, everyone is opting to use the higher irons nowadays, even the professionals. They are easier to hit and also produce almost similar distances.
Hybrids came into the scene no more than 10 years ago. They have caught the attention of both pros and beginners. Basically, hybrids are a combination of irons and woods. Hybrids are a lot more forgiving than other clubs and a whole lot easier to use than the irons. The loft of the subsequent hybrids is almost identical to the woods and irons they replace. This is the main reason; even pros are opting to use hybrids.
Finally, once you are close to the hole and ready to take the final shot, you use a putter. The putter has a simple objective. It has no complicated usage, and you simply put the ball in the hole with this.
When is the best time to buy golf clubs?
The best time to buy golf clubs is when it is late winter or into spring. This is because in summer all the new clubs come out and the people play more in the summer. So, just before summer, you will find the best models of the last season at their lowest prices. It is the basic rule of supply and demand. During late winter, the supply of golf clubs is high due to the stock of last season’s unsold clubs. Also, the demand is low because it is way too cold in the golf course or basically it is covered in snow. So, the combination of both these factors drive the prices very low.
Summer is when the demand for golf clubs skyrockets, so prices spike a lot. People also realize during the heat, what are the gears that they lack in their arsenal. This is the least favorable time to go shopping for golf clubs and any related accessories as well.
The prices of clubs vary for the rest of the year. Some clubs or shops are usually on sale at different times. You may even get some great deals or you may not. That depends totally on luck. Avoiding summer and taking advantage of late winter is the trick to getting the best deals for golf clubs.
How is golf club length measured?
If you have bought a new golf club and you are not sure they gave you the right length or not. Now you want to measure the club to make sure you got what you wanted. Fear not, you came to the right place.
Before measuring the club, you need a few materials. First, you need a 48-inch measuring tape, and then you need your club of course. Hold your club up straight and then place it flat on a flat surface. Make sure the clubface is parallel to the ground. Hold the club by placing your hand on top and make sure it is steady. Hold the measuring tape at the end of the shaft and make sure the tape is sticking to the shaft of the club. Extend the tape to the other end of the shaft up to the heel. The reading on the end of the tape is the length of your golf club.
How to swing a golf club
How good you are at golf largely depends on how good your swing is. If you feel like your technique is wrong or if you have never swung a golf club in your life, you are in the right place. Here is the step by step guide of how to swing a golf club.
The stance is a very important part of the process. To take your stance, start by placing your non-dominant leg slightly ahead of the ball. This will ensure you can place the club on top of the golf ball and also in the middle of your body. Make sure your body is aligned correctly. This means you need to make sure your shoulders and feet are square. The easiest way to do this is to imagine a line that points towards the target. Align your shoulders and feet to this line.
Now it is time to place your arms correctly. Place the middle of the clubface close to the ball and make sure your arms are relaxed. It is important to remember not to make your arms stiff while taking this stance. To do this, make sure your upper body is bent towards the ball, and your hip is away from the ball. Your knees will be slightly bent and not stiff.
There are a lot of correct grips for taking a good swing. You can choose whichever you are more comfortable with. But the common factor with all the swings is that you need to relax your fingers and not grip the club too tight. You need to keep the grip natural.
The easiest grip to pull off is the baseball grip. If you hold the club upright with the clubhead above, your non-dominant hand will be below your dominant hand. Make sure the index finger of your non-dominant hand is touching the index finger of your dominant hand.
Before starting the actual swing that will send the ball flying, remember that you do not need to hit the ball with all your strength. An easy-grip is the key to this. After you have your grip down, start to swing the club backward. Your wrists can bend when swinging backwards, do not keep them stiff. Your torso will rotate at the apex of your backswing, and your dominant hand will bend.
Time for the downswing. Swing the club down and remember not to grip your club too tightly. When the club is swinging down, the clubhead will lag behind the rest of the club and your hand as well. Continue with the downswing by shifting the weight of your body from the back foot to your front foot. After the club hits the ball, remember to follow through. Your eyes should not be off the ball during the whole process.
How to grip the golf club
A good grip is a key to success for every shot you take at the golf ball. A proper grip is very easy, as well. There are no complications to it. So, let us see how to have a proper grip on the golf club.
To begin, hold the top of the club with your dominant hand and put your non-dominant hand against the grip of the club and wrap your fingers around the grip. The grip should be mostly your fingers, and there should be a contract between your fingers and your lower palm. After that, put your dominant hand below the other hand and just like before use your fingers for the grip. Both of your thumbs should be pointed towards the clubface.
How to repair a golf club
Repairing golf clubs yourself is a very satisfying job. And of course, you know your clubs and your needs better than anyone, so it is recommended that you repair your clubs yourself to get the utmost satisfaction. Before you can begin with the repairs, you need some common tools.
- A workbench long enough for your clubs.
- Clamps to hold the clubs in place.
- A knife, preferably with hooked blades.
- A heat gun for any wielding.
- Rolls of two-way tape for grip installation.
- Rolls of masking tape.
- A hacksaw.
You may require other tools for any specialized repairs, but these common ones should have you mostly covered. The most common repair you need to do is to replace a broken shaft. First, insert the shaft in the clamps on your workbench to hold it in place. Use the heat gun to warm up the adhesive that is holding the shaft in place. You need to use medium heat for graphite shafts and high heat for steel shafts. When the adhesive has melted, pull the broken piece from the clubhead. Use a rag to wipe away leftover adhesives while they are still melted.
Apply epoxy to the clubhead that joins with the new shaft and applies epoxy to the tip of the shaft as well. Then insert the shaft inside the hosel (the connector between the clubhead and the shaft). Make sure you properly align the shaft with the clubhead. Wipe any epoxy that may have leaked. Remove the club from the clamps and leave the club upright for at least 12 hours to let the epoxy dry.
Can golf club shafts be shortened?
Yes, gold clubs can be shortened to adapt it to your needs. When you shorten your club, it gets lighter, stiffer and flatter. The general rule is that every half inch you cut off, three swing weight points are lost.
Shortening a club is easy. First, remove the grip from the shaft. Measure the length of shaft you want to shorten and add an additional 1/8 inch for the end of the grip. Mark the measured length with a marker. Clamp the club on your workbench and use a saw to cut the shaft. Sand the end of the shaft that you cut with a sanding paper and put the grip back on. Congrats you have successfully shortened your club.
Can golf club shafts be lengthened?
Yes, golf clubs can be lengthened. There are two reasons why you would want to lengthen your club. It is either because your club does not fit the dimensions of your body or because you need for distance for your shots. There are two ways you can increase the length of your club, either with a longer shaft or by increasing the length of your current shaft.
Lengthening your shaft is a simple method, and it is cheaper as well. You can buy a cheap shaft extension that increases the length of the shaft by two inches. To add this extension to your club, first, you need to remove the grip. Then fit the extension to the existing shaft. It should fit pretty smoothly, not requiring any excess force. Measure any unwanted length and mark it with a marker. Like for instance, you want a one-and-a-half-inch extension. Then mark half an inch and cut it off with a saw.
After you have your desired length, apply epoxy to the extension and make sure you wipe off any excess. Attach the grip and leave the club upright for at least 12 hours. Congrats you have successfully extended your club.
Can golf club grips be reused?
Yes, golf club grips can be reused but not if you remove the knife. To remove a grip and still have it in a condition where it is reusable, you need to remove it using an air compressor. The process is very easy if you have an air compressor around.
First, hold the club down with a clamp-on your workbench. Insert the nozzle of the air compressor at the end of the grip. Grab the end of the grip and turn on the air compressor. Twist the grip of the shaft with minimal force and let the air fill the shaft. When you hear air escaping the vent hole, pull the grip off the shaft.
Can golf club lie be changed?
Yes, a golf club’s lie can be changed. However, you can not change the lie by yourself. You need to go to your local golf shop to change it. Changing the lie enhances the accuracy of the club and also allows more loft. There is a club bending machine available that is used to change the angle but remember that any irregulars may damage the club, so be very careful if you decide to change the lie of the club.
Make sure you heat the lie properly before attempting to change the angle yourself. Most of the time, a breakage is caused because the lie was not heated properly. There are also multiple manufacturing irregularities that cause breakage. It is best to leave this in the hand of professionals if you have to have the lie changed. As manufacturing irregularities can not be easily identified, even professionals may cause breakage during the process. So, keep these in mind if you want to change the lie angle on your club.
What is a golf club driver?
The 1-wood is often referred to as the driver. This club is designed to hit the ball the farthest, so this club has the largest clubhead. Other than that, the driver also has the longest shaft and the least amount of loft. The only exception being some types of putters. The common use for drivers is to hit the ball from the tee, but some highly skilled golfers opt to use it even on the fairway.
The loft of the driver is usually between 8.5 degrees to 13 degrees. Drivers with higher angles launch the ball in a higher trajectory, which may or may not yield more distance depending on some other factors as well.
The driver is used for hitting the ball from the tee because the added height of the golf ball on the tee allows it to be struck by the sweet spot of the clubhead. If the ball is on the ground, it will not be struck by the large sweet spot.
What are Golf club degrees?
The degrees the clubhead is bent from the shaft of the golf club is called the loft. This affects the trajectory and distance of the golf ball when it is struck with the club. The loft is denoted with numerals like 1, 2, 3 and so on.
The driver, which is known as the 1 wood, has a loft between 7 to 12 degrees. Higher woods like the 3 wood has a loft of 15 to 18 degrees, and the 5 wood has a loft of 20 to 22 degrees.
The lower the loft degrees are of a club, the harder it is to use. So, naturally you may have guessed it already, lower woods have greater distance, and you have guessed it right. Pros tend to use the lower woods more, while beginners will want to favor higher woods.
You will hear terms like strengthening and weakening lofts. Strengthening a club's loft means lowering the loft and weakening means the opposite. Which means strengthening a club's loft by 1 degree means bending a club from 25 degrees to 24 degrees. This is usually done by a club-fitter.
What's the difference between PW, AW, SW, & LW?
How to calculate Golf clubs distance?
It is important for a golfer to know the distance of his/her clubs. Why, you ask? Think of this scenario, where you are 150 yards away from your target. You do not know which of your clubs have the distance of 150 yards, so you pull a random iron and shot. And guess what, you are short from your target. This would not have happened if you knew which of your irons had a distance of 150 yards.
It is advised that you do not go to a driving range for this as the range balls are very inaccurate. You can make an accurate measurement in a golf course easily.
All you need to figure out the distances of your clubs are some golf balls and a GPS. Pick a spot in the course and hit some golf balls from a single spot with a single club. Then use the GPS and walk up to the balls to get the distance of the club.
You can reduce your effort even more with a simple process. Let's say you measured the distance of your 9-iron and found out it was 120 yards. Then the distance of your 7-iron was 140 yards. So, the distance of your 8-iron will be 130 yards. As easy as that.
Golf clubs cleaning Tips
There is a lot of devices found out in the market today for cleaning your golf club. Instead of spending your money on those expensive machines, we are going to show you how to do it with a good old bucket of soap water.
First, fill up a sink or a bucket with warm water and add a little washing liquid. Make sure the water is not too hot, or else it will harm the ferrules, which join the clubheads to the shafts. Place your clubs with the clubheads submerged in the bucket or sink and let them soak for a while. This will loosen any dirt on the club. After a few minutes take out the clubs and use an old brush to clean the clubs. First, clean the grooves of clubs and then the back of the clubheads. Use a towel to dry off the shaft as well.
As for the grip, use a wet rag and just rub the grip. Once it is clean, use warm flowing water to rinse them and make sure the water is not too hot. Then use a towel to dry up the grip.
Golf club head covers Uses
Headcovers are generally used to protect clubs and their shafts, but people also use them for aesthetic beauty as well. Headcovers come in many designs that make your golf set more aesthetically pleasing.
The main purpose of headcovers is to protect your clubs from the jostle that occurs when you carry your clubs in your bag. Headcovers are most generally used for woods and hybrids. Woods were in fact actually made from woods once. So to prevent the woods from being damage, headcovers were used for them. Nowadays, as the heads are made from metal, they do not need as much protection, but graphite shafts, on the other hand, do need protection.